ST Engineering Newtec MDM6000 Satellite Modem
Quantity:
The ST Engineering Newtec MDM6000 Satellite IP Modem is a versatile next generation modem optimized for a wide range of applications such as cellular backhauling, IP trunking and fiber restoration. The MDM6000 modem is typically installed at both ends of a point-to-point satellite link or at the remote sites of a star network. The unit can work as a modulator, demodulator or modem depending on the network configuration and integrates seamlessly with terrestrial networks and equipment. The modem is in full compliance with the DVB-S2 and DVB-S2X standards, achieving the highest possible efficiency at maximum service availability.
Efficiency at the Core
The Newtec MDM6000 Satellite Modem combines a number of innovative elements to improve current market available efficiencies, thereby lowering the overall Total Cost of Ownership. New modulation and Forward Error Correction (FEC) codes up to 256APSK in the DVB-S2X standard in combination with innovative technologies such as 133 Mbaud, Clean Channel Technology®, Bandwidth Cancellation (BWC), Automatic Uplink Power Control (AUPC), FlexACM®, QoS, Shaping and Equalink® 3 are embedded in the modem and bring the satellite link to full efficiency. Depending on the application, the Newtec MDM6000 Satellite Modem can be used in conjunction with the Newtec HUB6000 Satellite Hub. The performance can be increased even more by adding Newtec’s network optimization technologies, such as acceleration, compression and bandwidth management.
Optimal Availability
Newtec’s auto-adaptive technology FlexACM is incorporated in the MDM6000 modem and deals with fading conditions (rain, dust, interference) and inclined orbit satellites. Thanks to FlexACM, fading will no longer interrupt the transmission between the hub and remote sites nor result in loss of data. The maximum possible throughput can be achieved at all times. Additionally, the Automatic Uplink Power Control mechanism ensures maximum use of the link budget at all times.
The Newtec MDM6000 Satellite Modem is a versatile modem which allows service providers and government operations to increase the amount of services or the customer base within the same bandwidth. At the same time it introduces ways to reduce OPEX costs and increase the profitability of their business at maximum efficiency and optimum availability.
Key Features
• Very granular rate licensing scheme with rates from 1 Mbps up to 425 Mbps bidirectional
• Suitable for low, medium and high speed applications, baudrates up to 133 Mbaud to handle all common transponder sizes
• Clean Channel Technology for additional bandwidth efficiency gains by allowing optimal carrier spacing
• DVB-S2, DVB-S2X (QPSK up to 256APSK)
• Newtec S2 Extensions (up to 64APSK) for closed network operation
• Default IF and L-band on TX and RX for ease of operation
• Optional Equalink 3 for linear and non-linear pre-distortion
• Reduce impact of RF Interferences (RFI) by enabling DVB RF Carrier ID (DVB-CID)
• All MODCODs and baudrates default enabled for flexible and optimal operation of the network
• Intelligent Uplink Power Control
• NLPC for intermod removal
• FlexACM for adaptive environments like variable interferences from rain and dust or for inclined orbit operation
• Standard GSE encapsulation for minimal overhead
• Support for MPE, ULE and XPE for working with legacy equipment
• Adaptive traffic shaping and bandwidth management allowing maximal SLA adherence even in case of ACM
• Advanced Quality of Service (QoS) for better customer experience
• Built-in spectrum analyzer and constellation diagram viewer
• Easy operation through secure front panel, SNMP, HTTP and CLI interfaces
• Modified OpenAMIP support to interwork with stabilized antennas from different vendors
Related Bandwidth Efficiency Technologies
Clean Channel Technology
Equalink 3
DVB-S2X
FlexACM
Bandwidth Cancellation
